Call Us Today

Call Us Today


Fiberglass Insulation in Oklahoma City, Stillwater, and Tulsa

Fiberglass Insulation - Stillwater, Oklahoma City, Tulsa

If you want a quick, affordable way to keep your building cooler in the summer and warmer in the winter, consider fiberglass insulation.  Blown in insulation can save you up to 40 percent on your energy bill costs. We are manufacturer-certified to install fiberglass insulation in Oklahoma City, Tulsa, Stillwater, and throughout the area.

Insulation works by resisting transfer of heat or cold. The ability of the material to slow heat or cold transfer is measured in R-value - the higher the value, the slower the transfer. More technically, the R-value depends on thickness and uniform density of the material.  Fiberglass has an R-Value of 2.5 to 3 per inch when loose fill is installed, such as in your attic.  It has an R-Value of 4 per inch when packed tightly, such as in your walls.

You will not find an easier way to add strong thermal protection to a light-framed building than fiberglass. And you won’t find a better installer in the area. We are certified by one of the leading manufacturers, CertainTeed, to apply its fiberglass insulation. We are also Certified Master Insulators.  That means we have the expertise to evaluate your energy need, recommend the proper type of insulation for your building type, estimate how much insulation you need, and expertly apply insulation in your home or building. 

Types of Fiberglass Insulation for Tulsa, Oklahoma City, and Stillwater

Loose fill – Can be applied to open areas such as attics.  Pneumatic machines send a stream of loose fibers through our long insulation hoses attached to our insulation machine inside our trailer  parked outside. The process is fast and neater than it might appear. Our crews will not disrupt your work or home activities when appling fiberglass insulation.  Fast, efficient, budget friendly, and no cleanup, this way alone can save home owners 40 percent on their energy bills every month.  This means that a typical house can pay for the entire installation job in only a few months.

Dense-pack wall insulation – A special type of loose fill blow in insulation can boost the energy efficiency of walls and spaces that are insulated too little or not at all. It is blown with hoses that areinserted into holes cut into inside or exterior walls. The holes are then plugged with 2 inch styrofoam plugs at the end of the job and we leave no mess behind.  When we finish, your wall is ready to be mudded over, textured, and repainted.  Need a drywall or painter recommendation?  No problem, we have many we work with closely.

Many factors, from your building code to your budget, will determine which type of fiberglass insulation is right for you.  Call us today and see what would be best for you.

Proper Fiberglass Installation in the Oklahoma City, Tulsa, and Stillwater Areas

Even more important than what type of insulation you use is how it is applied. You don’t want your installer to leave gaps or holes that allow warm or cold air transfer. Correct installation is a big factor in ensuring the material’s R-value meets manufacturer standards. It takes experience and knowledge. Our multiple certifications and testimonials are proof that we have the skills to do the job right when we install fiberglass insulation in your home or building.

Many Fiberglass Insulation Applications

  • Insulation types can be combined.
  • They can be added right on top of old fiberglass and cellulose materials.
  • The added fiberglass instantly adds a layer of protection without the need for costly removal.
  • Talk to us about the best type of fiberglass insulation for both new and existing construction. We can do it all.

CertainTeed Protection

We use products by CertainTeed, a leading manufacturer in all types of building materials because they are warrantied to work and are 100 percent safe. The particles will not become airborne and they do not contain formaldehyde or boric acid. They are certified safe for use in all building types including warehouses, churches, schools, barns and gymnasiums.

Guaranteed Energy Savings in Oklahoma

Our products, when properly installed, will save you up to 40 percent on your energy bills and that will not change over time. Unlike cellulose, fiberglass is very sturdy and will not settle out. When material settles downward, it leaves gaps through which heat or cold can transfer, which makes the R-value decrease.

If you are a building owner who wants to achieve greater energy efficiency quickly and easily, fiberglass insulation is a great choice to consider. Our technicians will answer your questions in a free, no-obligation consultation and give you a free cost estimate, along with our Price-Match Guarantee.

Call now for fiberglass insulation in Tulsa, Oklahoma City, Stillwater, Woodward, Guthrie, Enid, Ponca City and throughout the area.